To test the Trojan Go network,follow these organized steps:

1. Network Topology Verification:

   • Action: Use a network visualization tool (e.g., Graphviz) to map the network layout.
   • Steps:
     1. Input the network's IP addresses and server addresses.
     2. Generate the map to visualize the network structure.

2. Network Configuration:

   • Action: Configure the network using a command-line tool.
   • Tools: Use netstat for configuration and routing.
   • Steps:
     1. Ensure each server has the correct IP, port, and authentication (if required).
     2. Configure services like port forwarding and routing.
     3. Verify that data flows through the network.

3. Traffic Testing:

   • Action: Send test traffic through the network.
   • Tools: Use ipconfig for IP addresses and netstat for traffic sending.
   • Steps:
     1. Use ipconfig to check connected devices.
     2. Use netstat to send test data (e.g., a file or stream).
     3. Inspect received data with nano.

4. Network Status Check:

   • Action: Log in to an admin account for network status.
   • Steps:
     1. Access the admin dashboard via a web interface.
     2. Check network status and any errors or issues.

5. Documentation and Reporting:

   • Action: Document findings and issues.
   • Steps:
     1. Note any failed connections or network errors.
     2. Document issues found during tests.
     3. Report problems to the admin account for resolution.

Additional Considerations:

• Configuration Tools: Use netstat and a networking tool like ipconfig for setup.
• Traffic Sending: Use curl or wget to send files through the network.
• Logging: Log into the admin account via web interface to access dashboard.

By following these steps, you can systematically verify the network's performance, troubleshoot issues, and ensure the network operates as expected.